Home>Products>SMITH Bearing>SMITH MYRV-45-C Cam Follower and Track Roller - Yoke Type
SMITH MYRV-45-C MODELS
Need a CAD or 3D Model?
SMITH MYRV-45-C Cam Follower and Track Roller - Yoke Type
category
SMITH Bearing
SMITH MYRV-45-C SPECIFICATIONS
With over 10170 full-service stores, our SMITH MYRV-45-C Cam Follower and Track Roller - Yoke Type inventory is extensive and our CONSOLIDATED BEARING Manufacturer Name parts Foshan Hongli Weiye Electromechanical Hardware Co., Ltd. are priced right. within 24 hours. This helps you maximize your CONSOLIDATED BEARING Brand productivity by saving time and your hard-earned dollars.
- SMITH
MYRV-45-C
- Negotiation
- Negotiation
- YUKEN Piston Pump Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
MYRV-45-C Interchange guide
- 0.875 in
- 13 Tooth Splined
- V2010
- 1.3125 in
- Buna-N
- 3000
- 0.728 in
- SAE B, 2 Bolt
- Single Shaft Seal
- 16/32
- 3000
- 3000
- N/A
- 3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm
- 0.873 in
- 0.872 in
- 0.7335 in
- 0.7225 in
- N/A
- 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm
- V2010-1F7S3S-11AA12
- 2500
- 2500
- 4.5
- 10.5
- N/A
- Outlet 135° CCW from Inlet
- Outlet Opposite Inlet
- 1/2 in SAE O-Ring
- 3/4 in SAE O-Ring
- 0.6
- 1.39
SMITH MYRV-45-C SMITH Compare similar products
Cross reference SMITH MYRV-45-C Cam Follower and Track Roller - Yoke Type | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | d | Noun | UNSPSC | Weight | Profile | Inventory | Enclosure | Weight / LBS |
MYRV-45-C | SMITH BEARING | 1.772 Inch | 45 Millimeter | Bearing | 31171530 | 0.935 | Yoke Type | 0.0 | Open | 2.061 |
SMITH YR-1-1/4 Cam Follower and Track Roller - Yoke Type | Displacement Shaft End (cu in/revolution):30.0 LB; Pilot Type:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Minor Diameter:V2010-1F7S3S-11AA12; Cover End RPM [Max:1 1/2; GPM @ 1,800 rpm, Cover End:Flange; Rotation:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:0.875 in; Mounting Flange:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.39; |
SMITH CR-2-3/4-XB Cam Follower and Track Roller - Stud Type | Cover End RPM [Max:30.0 LB; Minor Diameter [Min:Flange Mount; Mounting:Right Hand (CW); Shaft Length:V2010-1F7S3S-11AA12; Spline Description:1 1/2; Controlled Flow Rate:Flange; Seal Material:N/A; Weight:N/A; Integral Valve Configuration:0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.39; |
SMITH MYRV-35-S Cam Follower and Track Roller - Yoke Type | Minor Diameter:30.0 LB; Model No.:Flange Mount; Shaft Type:Right Hand (CW); Manufacturer Part No.:V2010-1F7S3S-11AA12; Shaft Seal Type:1 1/2; Shaft Length:Flange; Rotation:N/A; Mounting:N/A; Integral Valve Configuration:0.875 in; Displacement Cover End (cu in/revolution):13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.39; |
SMITH MYR-6-C Cam Follower and Track Roller - Yoke Type | Max. RPM [Max:30.0 LB; Shaft Key:Flange Mount; Shaft Type:Right Hand (CW); Port Orientation - Cover End:V2010-1F7S3S-11AA12; Pressure Port Size, Cover End:1 1/2; Seal Material:Flange; Minor Diameter [Max:N/A; Integral Valve Configuration:N/A; Displacement Shaft End (cu in/revolution):0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.39; |
SMITH HR-2-1/4 Cam Follower and Track Roller - Stud Type | Pressure Port Size, Cover End:30.0 LB; Port Type:Flange Mount; Max. RPM [Max:Right Hand (CW); Minor Diameter:V2010-1F7S3S-11AA12; Port Size:1 1/2; Minor Diameter [Max:Flange; Rotation:N/A; Shaft Type:N/A; Controlled Flow Rate:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.39; |
SMITH CR-3-1/4-BC Cam Follower and Track Roller - Stud Type | Shaft Length:30.0 LB; Seal Material:Flange Mount; Shaft Dia.:Right Hand (CW); Pressure Port Size, Shaft End:V2010-1F7S3S-11AA12; Major Diameter [Min:1 1/2; Pump Series:Flange; Displacement Shaft End (cu in/revolution):N/A; Cover End Pressure [Max:N/A; Port Size:0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.39; |
SMITH FCR-1-1/2 Cam Follower and Track Roller - Stud Type | Weight:30.0 LB; Shaft Type:Flange Mount; Major Diameter [Max:Right Hand (CW); Port Orientation - Cover End:V2010-1F7S3S-11AA12; Model No.:1 1/2; Cover End RPM [Max:Flange; GPM @ 1,800 rpm, Cover End:N/A; Cover End Pressure [Max:N/A; Controlled Flow Rate:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.39; |
SMITH MCR-40-B Cam Follower and Track Roller - Stud Type | Weight:30.0 LB; Major Diameter [Min:Flange Mount; Major Diameter [Max:Right Hand (CW); Port Orientation - Shaft End:V2010-1F7S3S-11AA12; Seal Material:1 1/2; Displacement Shaft End (cu in/revolution):Flange; Relief Valve Setting:N/A; Spline Description:N/A; Shaft Seal Type:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.39; |
SMITH BCR-1-3/4-XBC Cam Follower and Track Roller - Stud Type | Relief Valve Setting:30.0 LB; Max. RPM [Max:Flange Mount; Weight:Right Hand (CW); Shaft End RPM [Max:V2010-1F7S3S-11AA12; Mounting Flange:1 1/2; Major Diameter [Max:Flange; Port Orientation - Shaft End:N/A; Port Orientation - Cover End:N/A; Cover End Flow @ RPM:0.875 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.39; |
SMITH CR-1-X Cam Follower and Track Roller - Stud Type | Port Orientation - Shaft End:30.0 LB; Mounting Flange:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Port Type:V2010-1F7S3S-11AA12; Major Diameter [Max:1 1/2; Shaft Type:Flange; Shaft End RPM [Max:N/A; Minor Diameter:N/A; Cover End Flow @ RPM:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.39; |
SMITH MYRV-45-C Cam Follower and Track Roller - Yoke Type Video
Contact Us
- YUKEN Piston Pump Ltd.
- AddressNo. 7, Xiashi Road, Lunjiao Town, Shunde District, Foshan
- Phone(Working Time)86-13569923667
SMITH MYRV-45-C Technical Articles
timken bearing dealer price list |
jtekt europe bearings cad model |
what is ina needle roller bearing |
SMITH Bearing CATEGORIES
- YUKEN Single Vane Pump
- YUKEN Double Vane Pump
- YUKEN Piston Pump
- YUKEN Solenoid Directional Valve
- YUKEN Pressure Valve
- Vickers Ten Way Solenoid Valve
- Vickers Superposition Valve
- Vickers X Series Valve
- SKF Bearing
- Timken Bearing
- AMI Bearing
- CONSOLIDATED BEARING
- QM INDUSTRIES Bearing
- REXNORD Bearing
- SEALMASTER Bearing
- SMITH Bearing
- REXROTH HY-CHECK VALVE
- REXROTH Throttle check valves
- REXROTH Pressure reducing valve
- REXROTH Directional spool valves
- REXROTH Throttle check valve
- REXROTH Twin throttle check valve
- REXROTH Directional poppet valves
- REXROTH Throttle valves
- REXROTH Check valves
- REXROTH Pressure relief valve
- REXROTH Valves
- 6207 c3 Bearing
- 22317 Bearing
- skf km11 Bearing
- skf tih030m Bearing